NEFA DISCussion

Davis Forest in Brooklyn CT has been approved for an 18 hole course. The property includes 126 acres with trails. We are in the process of acquiring the necessary funding and beginning stages of design.

Please contact me if you are interested/available to volunteer to help design and build the course.

Thanks.
-Mike-

Mike Oatley wrote:Please contact me if you are interested/available to volunteer to help design and build the course.

I'm in

This is going to be a great course on an epic piece of property. Finally something moving toward the south east of CT.

I can't wait this will be awesome close to some area attractions I enjoy often

TY

Awesome! Southeast CT and RI are in need of courses so badly! Hopefully this course spreads like they have in the rest of CT and central MA and in 5 years they are EVERYWHERE!!!!!!!

Here's a link to the course where I mapped out potential holes for the front nine loop.

http://www.arcgis.com/apps/OnePane/cont ... 91d54ed113

Made some temporary tonal targets to experiment with the layout. Here's a pic (cost less than $10 per target)

http://i1094.photobucket.com/albums/i45 ... arget1.jpg

Design day scheduled for tomorrow 4/20 at 10AM at Davis Forest. Going to setup some temporary targets and tees and try out some hole layouts for the front 9. Come on down if you want to participate in the course design. Davis Forest is located near the Brooklyn Country Club. Trail head is located at the end of Salmon drive.

Is that located in Danielson? Tried to get directions but it kept coming up as Danielson ,ct

Salmon drive is a new development which doesn't seem to show up yet on the maps. The golf course is on South Street in East Brooklyn.

Mike Oatley wrote:Design day scheduled for tomorrow 4/20 at 10AM at Davis Forest. Going to setup some temporary targets and tees and try out some hole layouts for the front 9. Come on down if you want to participate in the course design. Davis Forest is located near the Brooklyn Country Club. Trail head is located at the end of Salmon drive.

4/21

yeah, sorry about that. Meeting will be tomorrow 4/21. Also changing the time to 9am, but will still be there at 10am for those that come later.

If it is near Taco Bell that is a big PLUS LOL.

Marked potential holes 1 through 5. Four seems a bit long according to the GPS tracks. Might have to move that one up a bit.
Map can be found here (Tracks and markers are clickable for more information):

http://www.arcgis.com/apps/OnePane/cont ... 91d54ed113

How close is the walk to the next holes?
I think good disk golf courses don't have to long of a walk to the next hole.
That could just be me thou LOL.

So far the walk to each is pretty close. Might be deceiving on the map.

Another design day is scheduled for this Sunday 4/29 at 1pm.

I built the other temporary targets, so we plan to setup holes 6 through 9 and try the course. There is quite a bit of downed trees and brush to clean up, but it is playable for testing the design.

Bring your bug spray. The ticks and may flies were out last week.

I will be there with a few friends. I'll bring my tailgate grill so we can have some food as well.

Heather and I should be there.

Logged some potential holes for the second loop.

http://www.arcgis.com/apps/OnePane/cont ... 91d54ed113

Brought out the machete and cleaned up around the first two potential holes. Both are down hill left to right. Here's some pics:

1a. Shot from Tee #1:


1b. Shot from behind Target #1


2a. Shot from behind Tee #2


2b. Shot from behind Target #2

Town approved funds for the 18 hole course, but the timber harvest has been postponed. We'll have to build it by hand.

Drop your discs and pick up some tools. Let's build it!

ty all involved
this is gonna be in a perfect spot

Planning & Zoning requested a site plan in order to give approval to start installation. Here's a draft document I put together. Please provide any feedback as I have not done a site plan before.


https://docs.google.com/presentation/pub?id=1T5pC77Ck8bPihcImiBB5e-KrUxdgmtqKaGXsIZNND7M&start=false&loop=false&delayms=60000

Thanks.

Looks good to me.
But Crushed stone for teepads? The pads with Stone always get so uneven you trip on the humps.
Pavers would be better.

I figured we'd let the course settle in a bit before determining more permanent tee pad materials. This will at least provide a good base at first. Also keeps the cost down for the initial roll out.

Looks great Mike, very professional.

The terrain out there is unreal. Can't wait to play this course.

great presentation....what software did ya use?

good job Mike and crew

are you digging the sediment out before the stone base is applied?

I created it using google docs (free online)

just wondering if there is anything new on this front...CT in the future this Jan want to stop by and check it out